Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Компьютеры » Программы » TeraByte Image & TeraByte BootIt (Часть 1)

Модерирует : gyra, Maz

Maz (19-08-2019 22:22): TeraByte Image & TeraByte BootIt (Часть 2)  Версия для печати • ПодписатьсяДобавить в закладки
На первую страницук этому сообщениюк последнему сообщению

   

dialmak



BANNED
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Some work arounds using kernel boot parameters that have worked for some
users in specific situations are listed below:
 
1. Dell Optiplex system hangs on boot. Try the pci=nomsi boot paramter:
   boot: 1 pci=nomsi
 
2. The system hangs on boot with a message similar to the following:
   ACPI: Assume Root bridge [\_SB_.PCI]. Try the pci=nommconf boot parameter:
   boot: 1 pci=nommconf
 
3. The system hangs on boot with "interrupt lost" error message. Try the
   acpi=off boot paramter:
   boot: 1 acpi=off
 
4. If a system with 4 GiB or more of RAM hangs on boot, try the '4gh' boot
   option. This option has been added to the main boot menu screen as of  
   boot disk version LBD220EN (IFL version 2.57).
 
5. If a system has IEEE1394 support (FireWire), and you see a console message
   e.g. "Disabling IRQ #10" during boot, or soon after boot, the 'irgpoll'
   boot parameter will usually correct this. When this happens, you may also dev)
   see very sluggish performance of USB 2 drives, or other similar symptoms.
   boot: 1 irqpoll
 
6. The system hangs at "Waiting for udev to complete". After a maximum time
   of 3 minutes, udev will time out and should get by the hang. If this happens
   frequently, run 'viewreport' from the console or terminal to create a report
   file (report.txt), and email it to TeraByte Support (see instructions on  
   initial console text screen).
 
7. For GUI version: If the system hangs while starting, using, or exiting the
   GUI desktop, you can try the alternate xserver (xfbdev) by using the
   following boot parameters at the boot prompt on the initial boot screen:
 
   boot: 1fb      (1280x1024 resolution)
   boot: 2fb      (1024x768 resolution)
   boot: 3fb      (800x600 resolution)
   boot: 4fb      (640x480 resolution)
 
   On some systems, the higher resolutions may not be available. In that case,
   you will be prompted to choose from a list of available resolutions during
   boot. The '4fb' parameter is one that should be available on almost any  
   system as a last resort.

Всего записей: 14007 | Зарегистр. 27-04-2013 | Отправлено: 14:53 16-06-2018 | Исправлено: dialmak, 15:18 16-06-2018
   

На первую страницук этому сообщениюк последнему сообщению

Компьютерный форум Ru.Board » Компьютеры » Программы » TeraByte Image & TeraByte BootIt (Часть 1)
Maz (19-08-2019 22:22): TeraByte Image & TeraByte BootIt (Часть 2)


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru