ivan3259
Gold Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Hard Disk Sentinel Pro beta version 4.71.10:
www.hdsentinel.com/beta4/hdsentinel_pro_setup_47110-xxker.zip
- added new disk testing method: Repair disk drive (Disk menu -> Surface test)
designed to repair weak sectors, force the hard disk to stabilize problems and force reallocation of bad sectors
(if required)
can be used on even system drive with running operating system (Pro version only)
- added manual repair of any disk sector in Disk Contents Inspector:
use Disk menu -> Surface test -> View (or start any surface test) and click on the disk surface map to view
the raw contents of any sector. Go to the appropriate sector and if it is unreadable/reports error, the
Repair button attempts to repair that (Pro version only)
- increased Configuration window to improve readability and visibility
- added support of high-DPI displays, including but not limited to 4K displays with high DPI scaling
- added option to perform write testing with any byte, byte/character sequence
Disk menu -> Surface test -> Write test -> Configuration page -> Write pattern
Specify 0xAA 0xBB etc. to specify hexadecimal sequence
- added option to automatically save all results of disk tests:
Configuration -> Advanced options -> Automatically save disk test results to folder
saves images/graphs, log, results, block performance details after Disk menu -> Surface test functions
saves image after Disk menu -> Random seek test function
saves text report and brief log after Disk menu -> Short self test / Extended self test functions
- added option to perform Automatic detection based on disk utilization (Configuration -> Advanced options)
automatically prevent detection if the disk utilization shows that the hard disk is inactive, there is
no data transfer, no read/write commands (based on the Disk Performance page)
- added option to Configuration -> Message settings to execute external command (or BAT file) when alert
triggered. The following environment variables set to be accessible from the started external command (or BAT file):
HDS_TimeStamp : date and time of the actual alert in fixed format yyyymmdd hhmmss
HDS_TimeStampClean : date and time of the alert in user-friendly format (current Windows regional setting)
HDS_Host : current host (computer) name
HDS_Alert : the alert (eg. Overheat)
HDS_Disk : affected disk(s)
HDS_Threshold : threshold configured (contain Celsius/Fahrenheit or % symbols)
HDS_ThresholdValue : threshold configured (only the number)
HDS_Health : generic health information of all drives
HDS_Partition : generic partition information of all drives
HDS_LowestDiskHealth: the lowest health % value of all drives
- improved detection and compatibility with Marvell 9230 RAID controllers
- improved detection, compatibility and reponse time for LSI / Dell / Avago SAS HBA controllers
- improved compatibility with TOSHIBA SSD, Intel NVMe SSD
- improved power on time detection and display of many SAS/SCSI hard disks and SAS SSDs
- improved support of 1.8" hard disk drives
- full support of non-standard byte-per-sector values: SAS hard disks formatted with
520 bytes/sector or 528 bytes/sector. Show bytes-per-sector for SCSI/SAS drives too.
- all disk tests (Disk menu -> Surface test functions, Disk menu -> Random seek test,
Disk menu -> Short/Extended self tests) work with hard disks formatted with 520 bytes/sector or 528 bytes/sector
- added support of new Kingston, Crucial SSDs, improved support of Sandisk SSDs
- added support of Supermicro SMC2008 SAS/SATA RAID controller
- added support of FTS PRAID EP400i SAS/SATA RAID controller
- show started test type after the test completes in the popup window
- fixed: some versions were not working under Windows 98, ME, NT4 - now working again
- user interface fixes, modifications |
