Victor_VG
Tracker Mod | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору General Module Information Module Number: 0 Module Size: 4 GBytes Memory Type: DDR3 SDRAM Module Type: Registered DIMM (RDIMM) Memory Speed: 800.0 MHz (DDR3-1600 / PC3-12800) Module Manufacturer: Samsung Module Part Number: M393B5170GB0-CK0 Module Revision: 0 Module Serial Number: xxxxxxxxx (xxxxxxxx) Module Manufacturing Date: Year: 2012, Week: 24 Module Manufacturing Location: 2 SDRAM Manufacturer: Samsung Error Check/Correction: ECC Module characteristics Row Address Bits: 14 Column Address Bits: 11 Number Of Banks: 8 Module Density: 1024 Mb Number Of Ranks: 2 Device Width: 4 bits Bus Width: 64 bits Module Nominal Voltage (VDD): 1.5 V Module timing Minimum SDRAM Cycle Time (tCKmin): 1.250 ns CAS# Latencies Supported: 6, 7, 8, 9, 10, 11 Minimum CAS# Latency Time (tAAmin): 13.125 ns Minimum RAS# to CAS# Delay (tRCDmin): 13.125 ns Minimum Row Precharge Time (tRPmin): 13.125 ns Minimum Active to Precharge Time (tRASmin): 35.000 ns Supported Module Timing at 800.0 MHz: 11-11-11-28 Supported Module Timing at 666.7 MHz: 9-9-9-24 Supported Module Timing at 533.3 MHz: 7-7-7-19 Supported Module Timing at 400.0 MHz: 6-6-6-14 Minimum Write Recovery Time (tWRmin): 15.000 ns Minimum Row Active to Row Active Delay (tRRDmin): 6.000 ns Minimum Active to Active/Refresh Time (tRCmin): 48.125 ns Minimum Refresh Recovery Time Delay (tRFCmin): 110.000 ns Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns Minimum Four Activate Window Delay Time (tFAWmin): 30.000 ns Features Partial Array Self Refresh (PASR): Not Supported On-die Thermal Sensor (ODTS) Readout: Not Supported Auto Self Refresh (ASR): Not Supported Extended Temperature 1X Refresh Rate: Not Supported Extended Temperature Range: Supported Module Temperature Sensor: Supported Pseudo Target Row Refresh (pTRR): Not Supported Module Nominal Height: 29 - 30 mm Module Maximum Thickness (Front): 1 - 2 mm Module Maximum Thickness (Back): 1 - 2 mm |