1246
Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Всем привет! Одним днем комп не загрузился. Перестал инициироваться диск WD green 2,5 ТБ. На нем осталась нужная инфа. В режиме AHCI - диск определяется в биос через раз. Если определяется, то долго, и статус смарт - bad. В винде его вообще не видно нигде. В режиме ide - определяется быстро, виден в устройствах, но не могу его инициировать. Выдает ошибку ввода/вывода. get data back и r-studio его видят, но ничего сделать с ним не могут. Ошибка чтения/записи. Прогнал тест диском в досе - получил такие логи: Можно ли восстановить данные и насколько жив hdd? smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-pmagic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD25EZRX-00MMMB0 Serial Number: WD-WCAWZ0513043 LU WWN Device Id: 5 0014ee 205b66590 Firmware Version: 80.00A80 User Capacity: 2,500,495,958,016 bytes [2.50 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Jun 29 23:32:41 2012 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 56) A fatal error or unknown test error occurred while the device was executing its self-test routine and the device was unable to complete the self-test routine. Total time to complete Offline data collection: (43500) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 184 159 021 Pre-fail Always - 7783 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 43 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 25 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 40 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 37 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 541 194 Temperature_Celsius 0x0022 117 111 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 5998 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5998 occurred at disk power-on lifetime: 25 hours (1 days + 1 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 08 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000008 = 8 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 08 00 00 e0 00 02:02:51.763 READ DMA ec 00 00 00 00 00 a0 00 02:02:51.689 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 02:02:51.689 SET FEATURES [Set transfer mode] Error 5997 occurred at disk power-on lifetime: 25 hours (1 days + 1 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 08 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000008 = 8 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 08 00 00 e0 00 02:02:51.607 READ DMA ec 00 00 00 00 00 a0 00 02:02:51.514 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 02:02:51.511 SET FEATURES [Set transfer mode] Error 5996 occurred at disk power-on lifetime: 25 hours (1 days + 1 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 08 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000008 = 8 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 08 00 00 e0 00 02:02:51.430 READ DMA ec 00 00 00 00 00 a0 00 02:02:51.345 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 02:02:51.345 SET FEATURES [Set transfer mode] Error 5995 occurred at disk power-on lifetime: 25 hours (1 days + 1 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 08 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000008 = 8 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 08 00 00 e0 00 02:02:51.263 READ DMA ec 00 00 00 00 00 a0 00 02:02:51.170 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 02:02:51.167 SET FEATURES [Set transfer mode] Error 5994 occurred at disk power-on lifetime: 25 hours (1 days + 1 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 08 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000008 = 8 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 08 00 00 e0 00 02:02:51.085 READ DMA ec 00 00 00 00 00 a0 00 02:02:51.012 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 02:02:51.012 SET FEATURES [Set transfer mode] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Fatal or unknown error 80% 25 - # 2 Short offline Fatal or unknown error 30% 25 - # 3 Conveyance offline Fatal or unknown error 90% 11 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |