freewood
Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-RELEASE #0: Tue Oct 25 20:06:43 MSD 2011 root@tirion.home.lan:/usr/obj/usr/src/sys/GENERIC i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1676.70-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2074071040 (1977 MB) ACPI APIC Table: <INTEL MOPNV10J> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP/HT): APIC ID: 3 ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 acpi0: <INTEL MOPNV10J> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x30c0-0x30c7 mem 0xe0300000-0xe037ffff,0xd0000000-0xdfffffff,0xe0200000-0xe02fffff irq 16 at device 2.0 on pci0 agp0: <Intel Pineview SVGA controller> on vgapci0 agp0: detected 8188k stolen memory agp0: aperture size is 256M pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xe0004000-0xe0004fff,0xe0000000-0xe0003fff irq 16 at device 0.0 on pci1 re0: Using 1 MSI messages re0: Chip rev. 0x28000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 70:71:bc:ac:70:e1 re0: [FILTER] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3080-0x309f irq 23 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3060-0x307f irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3020-0x303f irq 16 at device 29.3 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0384400-0xe03847ff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 skc0: <D-Link DGE-530T Gigabit Ethernet> port 0x1000-0x10ff mem 0xe0100000-0xe0103fff irq 21 at device 0.0 on pci5 skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 1c:bd:b9:ff:2b:5e miibus1: <MII bus> on sk0 e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 SATA300 controller> port 0x30b8-0x30bf,0x30cc-0x30cf,0x30b0-0x30b7,0x30c8-0x30cb,0x30a0-0x30af mem 0xe0384000-0xe03843ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. p4tcc0: <CPU Frequency Thermal Control> on cpu0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 p4tcc2: <CPU Frequency Thermal Control> on cpu2 p4tcc3: <CPU Frequency Thermal Control> on cpu3 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered acd0: DVDR <PIONEER DVD-RW DVR-216/1.03> at ata2-master UDMA66 SATA ad6: 1430798MB <WDC WD15EARS-00MVWB0 50.0AB50> at ata3-master UDMA100 SATA lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic3: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad6s1a ugen1.2: <vendor 0x0566> at usbus1 ukbd0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> on usbus1 kbd2 at ukbd0 uhid0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> on usbus1 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled WARNING: attempt to domain_add(netgraph) after domainfinalize() | Всего записей: 307 | Зарегистр. 28-12-2008 | Отправлено: 13:40 05-11-2011 | Исправлено: freewood, 19:42 05-11-2011 |
|