Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Компьютеры » В помощь системному администратору » Microsoft Exchange Server

Модерирует : lynx, Crash_Master, dg, emx, ShriEkeR

 Версия для печати • ПодписатьсяДобавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215

Открыть новую тему     Написать ответ в эту тему

Diadema



Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

Триал (120 дней):
Microsoft Exchange 2007
Microsoft Exchange 2010 Service Pack 1
Exchange 2010 pre-configured VHD
Microsoft Exchange 2010 Service Pack 3
 
Ключи смотрим тут
 
 
Полезные ссылки.
Microsoft TechNet Exchange 2007 [en]
Microsoft TechNet Exchange 2007 [ru] (ссылка от DiDragOna)
MSExchange.org MS Exchange 2007 forums
the Echangepedia blog
Exchange Server Community
Technet Russia Exchange 2007 forum
 
Статьи
  • Сертификаты и Exchange
     
    Небольшой F.A.Q.
  • Создание сертификата для MS Exchange 2007.
  • Ошибка 5.7.1 Client does not have permissions to send as this sender
  • При попытке удаления неподключенной (unmounted) базы, сервер сообщает об ошибке
  • Setup cannot use domain controller 's-dc1.RN-FINANCE.RU' because an override is set in the registry. Run Setup again, and specify '/DomainController:'
  • Спам фильтры Exchange
  • Проблема с Exchange после установки обновления July 2016 update rollup for Windows Server 2012 R2 (KB3172614)

  • Всего записей: 185 | Зарегистр. 17-01-2006 | Отправлено: 12:52 23-10-2006 | Исправлено: dimonprodigy, 07:19 24-06-2017
    wwladimir



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    BJ78
    Под массивом подразумевается DAG (у которого имеется свое имя и адрес...)  ?
    Почему "он" для внутренней только ?
    О каком способе соединения внешних клиентов  идет речь ?
     
    Или мы о разных вещах...

    Всего записей: 526 | Зарегистр. 08-11-2006 | Отправлено: 14:26 19-03-2012
    fly_indiz



    Silver Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    wwladimir
    DAG - это недокластер роли хранилища почтовых ящиков.
    я так понял он имеет ввиду отказоустойчивый кластер CAS

    Всего записей: 2611 | Зарегистр. 28-04-2006 | Отправлено: 15:16 19-03-2012
    BJ78



    Junior Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    fly_indiz
    Да, вы меня правильно поняли, имеется ввиду массив серверов CAS
    В начале вся система представляла собой два сервера объединенных в даг, при этом сервера (каждый) имеет по три роли, сервер 1 в настоящий момент отвечает за все три роли, на сервере 2 просто реплицируются базы данных.
    Сейчас поставлены сервера 3 и 4 только с ролями клиентского доступа, сервера 3 и 4 объеденены в массив CAS, но в связи с некотрой моей криворукостью и другими причинами (типа производительности сервера 1) на массив кас было решено повесить пока только локальных клиентов оутлук. В общем то идея удалась, я и группа товарищей спокойно цепляемся к своим ящикам уже используя массив кас, в качестве серверов клиентского доступа, но мы настроили себе оутлук руками, как сделать это для 250 сотрудников с отпиленными правами на любые настройки, я пока представляю плохо. Думал всем серверам в автодискаверед прописать имя массива, но остановился и задумался ведь это приведет к тому, что вообще все клиенты будут цепляться к массиву, и будут ли они вообще понимать новую запись?  
    В общем вопросов и непонятностей больще чем знаний и ответов, создать аналог сети нет возможности, а на рабочей сети эксперементировать страшновато.  
    Вот собственно и вся история
    В принципе можно вообще всех клиентов переключить на массив кас, но тогда надо менять настройки шлюза, как я понимаю, а к этим настройкам у меня доступ ограничен, да и не совсем понимаю что именно надо менять, вот и изгаляюсь только с внутренними клиентами
    Вы уж не пинайте за тупость )

    Всего записей: 56 | Зарегистр. 22-06-2011 | Отправлено: 21:07 19-03-2012 | Исправлено: BJ78, 21:12 19-03-2012
    wwladimir



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    По первой ссылке из гугля
    http://www.alexxhost.ru/2010/04/exchange-2010-dag-nlb.html
    читаем-
    Т.к. массив CAS используется только клиентами Outlook MAPI, то для обеспечения отказоустойчивости таких сервисов как Outlook Webb App, Exchange ActiveSync, Autodiscover и других, необходимо решить, что именно у вас будет выполнять роль балансировщика сетевой нагрузки (NLB)...
     
    Т.е. на другой клиентский доступ массив серверов CAS не влияет.
     
    По второй http://www.oszone.net/11720/Exchange-Autodiscover
    -При установке сервера клиентского доступа CAS (функция Autodiscover является частью этой роли сервера) точка SCP создается автоматически в Active Directory и настраивается, используя умолчания. Если у вас есть несколько серверов CAS, у вас также будет создано несколько точек SCP...
     
    Т.е не смешиваем в одну кучу Autodiscover AD (“Service Connection Point”) и веб сайт Autodiscover
     
    P.S. При поиске по Вашей теме я столько нового узнал...  

    Всего записей: 526 | Зарегистр. 08-11-2006 | Отправлено: 00:06 20-03-2012 | Исправлено: wwladimir, 00:27 20-03-2012
    fly_indiz



    Silver Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    wwladimir
    это то всё верно, тока вопрос не в этом.
    Массив CAS у него сделан и функционирует правильно (хотя почему он решил подпускать к массиву только локальные оутлуки - неясно, народ ходящий с внешки на OWA и оутлуками на MAPIoverRPCoverHTTPS тоже было бы логичным средиректить файрволом на IP массива CAS, ну да неважно, это пусть они сами решают..).
     
    Засада в том что в офисе полно оутлуков и они уже настроены на коннект у одному из двух серверов CAS. Задача в том чтобы оутлуки сами перенастроились на подключение к массиву CAS
     
    Иными словами - понять бы где именно указывается тот FQDN CAS-а, к которому цепляются оутлуки, чтобы вместо имени конкретного сервера поменять его на имя массива CAS

    Всего записей: 2611 | Зарегистр. 28-04-2006 | Отправлено: 11:36 21-03-2012 | Исправлено: fly_indiz, 11:41 21-03-2012
    wwladimir



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    Так вот вроде-
    http://winitpro.ru/index.php/2011/11/18/ustanovka-client-access-server-array-v-exchange-2010/

    Цитата:
    Обновляем базу данных почтовых ящиков
    После создания массива CAS, для любой новой почтовой базы, создаваемой в этом же сайте Active Directory, в качестве сервера, обрабатывающего RPC запросы (RpcClientAccessServer) к ящикам в этой базе будет указан созданный нами массив CAS.
     
    Однако все существующие почтовые базы придется обновить вручную, так, чтобы пользователи ящиков в этих базах подключались к созданному нами массиву серверов.
     
    [PS] C:\>Get-MailboxDatabase -Server EX2 | fl name, rpc*
     
    Примечание: стоит отметить, что все существующие профили Outlook так и останутся настроенными на отдельный Client Access сервер, а не на массив CAS. И, естественно, при падении этого сервера, не будут перенаправлены на другой сервер NLB кластера. Данные профили будет необходимо перенастроить вручную на использование массива CAS серверов. Вот почему предпочтительно настроить массив CAS до миграции пользовательских ящиков в Exchange Server 2010.

     
    Т.е. либо руками в  outlook-e, либо пользователю создать новый профиль почты. Варианты с обновлением профиля надо поискать, например http://www.howto-outlook.com/howto/deployprf.htm
    Наверно можно еще попробовать в реестр юзеру залезть и там в "поковыряться" (не екченжевские сервера в оутлке мне как-то приходилось массово менять [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles\Outlook]).

    Всего записей: 526 | Зарегистр. 08-11-2006 | Отправлено: 11:50 21-03-2012 | Исправлено: wwladimir, 12:06 21-03-2012
    fly_indiz



    Silver Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    wwladimir
    о, вот тогда мерси ) думаю теперь вопросы разрешатся у него )))

    Всего записей: 2611 | Зарегистр. 28-04-2006 | Отправлено: 12:00 21-03-2012
    BJ78



    Junior Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    fly_indiz
    Да, вы совершенно верно меня поняли ) А то видимо у меня не слишом хорошо получалось объяснить проблему
    wwladimir
    Спасибо за ссылки, изучаю

    Всего записей: 56 | Зарегистр. 22-06-2011 | Отправлено: 12:43 21-03-2012
    BJ78



    Junior Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    В общем идея такая, угробить ветку реестра  
    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles\Outlook
    Групповыми политиками, при загрузке клиент просит создать новый профиль, он сам конфигурируется, и врезультате клиент перецепляется на новый сервер. Буду обкатывать на тестовых машинах, в понедельник применю в домене.

    Всего записей: 56 | Зарегистр. 22-06-2011 | Отправлено: 11:46 23-03-2012
    wwladimir



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    BJ78
    Еще не применили? А то тут попалось очень простое и оригинальное решение -

    Цитата:
    По сути вопроса - указание сервера CAS для базы ящиков не заставляет Outlook'и менять настройки подключения (в большинстве случаев). Действенным методом является удаление роли CAS - в этом случае минут за 10-20 клиенты найдут новый CAS через Autodiscovery.

    источник - http://social.technet.microsoft.com/Forums/ru-RU/exchange2010ru/thread/c636b0ac-3701-4b70-85fb-4ee3cdfa29da/

    Всего записей: 526 | Зарегистр. 08-11-2006 | Отправлено: 15:35 23-03-2012 | Исправлено: wwladimir, 15:36 23-03-2012
    BJ78



    Junior Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    wwladimir
    Идея интересная, но если она не заработает, будет вселенская пичаль без возможности отката (быстрого). Попробую с веткой реестра, если не получится, удалю роль, но этого бы не очень хотелось.
    И думаю что если удалю роль CAS то внешним клиентам будет не к чему цепляться
     

    Всего записей: 56 | Зарегистр. 22-06-2011 | Отправлено: 17:35 23-03-2012 | Исправлено: BJ78, 22:16 23-03-2012
    golychev



    Advanced Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    а можно поинтересоваться, сколько же у вас клиентов что необходим CAS массив?

    Всего записей: 634 | Зарегистр. 09-02-2005 | Отправлено: 18:17 23-03-2012
    BJ78



    Junior Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    golychev
    Клиентов на вскидку 350 штук, офисных из них 200
    У меня очень параноидальное руководство, которое в случае сбоев мешает спокойно все восстанавливать, по этому очень хочу перестраховаться, да и просят полной отказоустойчивости для офисных клиентов.  
    Ну и мне самому, как идиоту, интересно потыкать новое )

    Всего записей: 56 | Зарегистр. 22-06-2011 | Отправлено: 22:19 23-03-2012
    golychev



    Advanced Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    BJ78
    думаю что скорее всего последний пункт послужил причиной
    ну а на тестовой среде уже подымал?

    Всего записей: 634 | Зарегистр. 09-02-2005 | Отправлено: 22:26 23-03-2012
    gamespb

    Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    Доброго всего,
    в outlook на своих контактах нажимаю раздать (создаётся письмо с приглашением использовать мою книгу)
    затем назначаю права "владелец"
    у приглашённых появляется общая папка с контактами
    НО при написании письма они не могут в адресной книге их выбирать! КАК правильно раздать контакты?
    имеем exchange2010 office2010
     
    изначально в контактах нет ни каких общих папок.
    хотелось кроме контактов получить и общие задания
     
    заранее спасибо

    Всего записей: 254 | Зарегистр. 29-03-2007 | Отправлено: 00:20 24-03-2012
    levkadub



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    Добрый день.  
    Пытаюсь установить  Exchange 2010 в сущуствующий домен и организацию Exchange 2003...  
     
    Встретился с такой вот ошибкой:  
     
    Microsoft Windows [Version 6.1.7601]  
    (c) Корпорация Майкрософт (Microsoft Corporation), 2009. Все права защищены.  
     
    E:\>Setup /roles:ca  
     
    Welcome to Microsoft Exchange Server 2010 Unattended Setup  
     
    Preparing Exchange Setup  
     
    Будут установлены следующие роли сервера  
    Роль сервера клиентского доступа  
     
    Выполнение проверки готовности Microsoft Exchange Server  
     
     
    Настройка Microsoft Exchange Server  
     
        Подготовка установки                                      ЗАВЕРШЕНО  
        Роль сервера клиентского доступа                          ОШИБКА  
         При выполнении "$error.Clear();  
              . "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";  
              Set-NtlmLoopbackCheck $false  
            " произошла следующая ошибка: "Неожиданный токен "&" в выражении или инс  
    трукции.".  
     
         При выполнении "$error.Clear();  
              . "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";  
              Set-NtlmLoopbackCheck $false  
            " произошла следующая ошибка: "Имя "Set-NtlmLoopbackCheck" не распознано  
     как имя командлета, функции, файла скрипта или выполняемой программы. Проверьте  
     правильность написания имени, а также наличие и правильность пути, после чего п  
    овторите попытку.".  
     
     
    Операция установки Exchange Server не завершена. Дополнительные сведения см. в  
    файле ExchangeSetup.log, расположенном в папке  
    "<SystemDrive>:\ExchangeSetupLogs".  
     
    Exchange Server setup encountered an error.  
     
    E:\>  
     
     
    Никак не могу найти инфу по ней.....  
    Искал на MS  
    гуглил - без толку.....  
     
    Надо установить одну роль - Client Access. И с ней как раз проблемы.

    Всего записей: 414 | Зарегистр. 23-04-2005 | Отправлено: 09:16 27-03-2012
    wwladimir



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    levkadub
    попробуйте отсюда начать
    http://technet.microsoft.com/ru-ru/exdeploy2010/default.aspx#DeploymentQuestions/ee721959/2003
     
    и здесь свои настройки перепроверить http://technet.microsoft.com/library/ru-RU/ee721969.aspx?t=exchgf1
     
    Ну и вот эти "шаги" прошли ?-  http://technet.microsoft.com/library/ru-RU/ee721969.aspx?t=exchgf1
     

    Всего записей: 526 | Зарегистр. 08-11-2006 | Отправлено: 09:37 27-03-2012 | Исправлено: wwladimir, 09:49 27-03-2012
    levkadub



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    с этого я и начал.......
     
    Предполагаю что проблемма кроется здесь:
    произошла следующая ошибка: "Неожиданный токен "&" в выражении или инс  
    трукции.".  

    Всего записей: 414 | Зарегистр. 23-04-2005 | Отправлено: 12:08 27-03-2012
    wwladimir



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
    levkadub
    А неожиданный (возможно) он потому, что все-же схему АД Вы не подготовили ...
    Или не выполнены пред. требования (фрамеворк не той версии пока, например).
    Покажите журнал
    Цитата:
    ExchangeSetup.log, расположенном в папке  
    "<SystemDrive>:\ExchangeSetupLogs".  

    И зря Вы так... Там действительно спецы пошагово и очень точно все дали.
    Хотя, я заметил, многим ниже собственного достоинства "мануалы" читать.  
    А я Вас отправил к помощнику по развертыванию- практически оскорбил наверное...
    А по второй ссылке программный анализатор (Exchange Pre-Deployment Analyzer) вообще "некошерно" использовать.
     
    P.S Увы, больше ничем помочь не могу. Нет такого опыта. Я с 2003 на 2010  сразу не переходил, а только последовательно по всем версиям.

    Всего записей: 526 | Зарегистр. 08-11-2006 | Отправлено: 16:43 27-03-2012 | Исправлено: wwladimir, 17:02 27-03-2012
    levkadub



    Full Member
    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

    Цитата:
    А неожиданный (возможно) он потому, что все-же схему АД Вы не подготовили ...  

    Подготавливал схему сам exchange - в процессе подготовки к инсталяции.
     
    фрамеворк не той версии пока, например
    - он последней версии
     
     

    Цитата:
    И зря Вы так... Там действительно спецы пошагово и очень точно все дали.  
    Хотя, я заметил, многим ниже собственного достоинства "мануалы" читать.  
    А я Вас отправил к помощнику по развертыванию- практически оскорбил наверное...  
    А по второй ссылке программный анализатор (Exchange Pre-Deployment Analyzer) вообще "некошерно" использовать.  

     
    - спишем это на плохое ваше настроение.....))))) (потому как мануалы прочитал и помощника изучил в 1-ю очередь(до того как ставить начал))
     
    а вот анализатор у меня не хочет запускаться - грит нету файлика xml с конфигом(ExPDA.config.xml)
     
    Добавлено:
    лог:
     
    [03.28.2012 07:22:00.0483] [0] **********************************************
    [03.28.2012 07:22:00.0483] [0] Starting Microsoft Exchange Server 2010 Setup
    [03.28.2012 07:22:00.0483] [0] **********************************************
    [03.28.2012 07:22:00.0483] [0] Local Time Zone: (UTC+09:00) Иркутск.
    [03.28.2012 07:22:00.0483] [0] Operating System version: Microsoft Windows NT 6.1.7601 Service Pack 1.
    [03.28.2012 07:22:00.0483] [0] Setup version: 14.1.218.15.
    [03.28.2012 07:22:00.0483] [0] Logged on user: CLASSIC\admin.
    [03.28.2012 07:22:02.0373] [0] Command Line Parameter Name='nologo', Value=''.
    [03.28.2012 07:22:02.0373] [0] Command Line Parameter Name='roles', Value='Microsoft.Exchange.Management.Deployment.RoleCollection'.
    [03.28.2012 07:22:02.0373] [0] Command Line Parameter Name='sourcedir', Value='E:\'.
    [03.28.2012 07:22:02.0373] [0] Command Line Parameter Name='fromsetup', Value=''.
    [03.28.2012 07:22:02.0373] [0] Command Line Parameter Name='mode', Value='Install'.
    [03.28.2012 07:22:02.0389] [0] ExSetup was started with the following command: '/NoLogo /role:ca /sourcedir:E:" /FromSetup'.
    [03.28.2012 07:22:02.0748] [0] Setup is choosing the domain controller to use
    [03.28.2012 07:22:02.0842] [0] The MSExchangeADTopology has a persisted domain controller: srv1.classic.ru
    [03.28.2012 07:22:03.0529] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use srv1.classic.ru
    [03.28.2012 07:22:03.0529] [0] Setup is choosing a global catalog...
    [03.28.2012 07:22:03.0545] [0] Setup has chosen the global catalog server srv1.classic.ru.
    [03.28.2012 07:22:03.0623] [0] Setup will use the domain controller 'srv1.classic.ru'.
    [03.28.2012 07:22:03.0623] [0] Setup will use the global catalog 'srv1.classic.ru'.
    [03.28.2012 07:22:03.0623] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=classic,DC=ru'.
    [03.28.2012 07:22:03.0623] [0] Exchange organization container for the organization is 'CN=classic,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=classic,DC=ru'.
    [03.28.2012 07:22:03.0654] [0] Setup will search for an Exchange Server object for the local machine with name 'EXCHANGE'.
    [03.28.2012 07:22:03.0685] [0] Exchange Server object found : 'CN=EXCHANGE,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=classic,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=classic,DC=ru'.
    [03.28.2012 07:22:03.0717] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole  
    [03.28.2012 07:22:03.0717] [0] The following datacenter roles are unpacked:  
    [03.28.2012 07:22:03.0717] [0] The following roles are installed: BridgeheadRole AdminToolsRole  
    [03.28.2012 07:22:03.0717] [0] The local server has some Exchange files installed.
    [03.28.2012 07:22:03.0888] [0] Setup will use the path 'E:\' for installing Exchange.
    [03.28.2012 07:22:03.0888] [0] Setup will discover the installed roles from server object 'CN=EXCHANGE,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=classic,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=classic,DC=ru'.
    [03.28.2012 07:22:03.0888] [0] 'BridgeheadRole' is installed on the server object.
    [03.28.2012 07:22:03.0888] [0] The installation mode is set to: 'Install'.
    [03.28.2012 07:22:10.0762] [0] An Exchange organization with name 'classic' was found in this forest.
    [03.28.2012 07:22:10.0762] [0] Active Directory Initialization status : 'True'.
    [03.28.2012 07:22:10.0762] [0] Schema Update Required Status : 'False'.
    [03.28.2012 07:22:10.0762] [0] Organization Configuration Update Required Status : 'False'.
    [03.28.2012 07:22:10.0762] [0] Domain Configuration Update Required Status : 'False'.
    [03.28.2012 07:22:10.0762] [0] The locally installed version is 14.1.218.15.
    [03.28.2012 07:22:10.0762] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
    [03.28.2012 07:22:11.0028] [0] Applying default role selection state
    [03.28.2012 07:22:11.0059] [0] Setup is determining what organization-level operations to perform.
    [03.28.2012 07:22:11.0059] [0] Because the value was specified, setup is setting the argument OrganizationName to the value classic.
    [03.28.2012 07:22:11.0059] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
    [03.28.2012 07:22:11.0137] [0] InstallModeDataHandler has 3 DataHandlers
    [03.28.2012 07:22:11.0137] [0] RootDataHandler has 1 DataHandlers
    [03.28.2012 07:22:11.0137] [0] The following server role(s) will be installed
    [03.28.2012 07:22:11.0152] [0]     Роль сервера клиентского доступа
    [03.28.2012 07:22:11.0168] [0] Validating options for the 1 requested roles
    [03.28.2012 07:22:11.0184] [0] Performing Microsoft Exchange Server Prerequisite Check
    [03.28.2012 07:22:11.0871] [0] Configuring Microsoft Exchange Server
    [03.28.2012 07:22:11.0887] [0] **************
    [03.28.2012 07:22:11.0887] [0] Setup will run the task 'Start-PreSetup'
    [03.28.2012 07:22:11.0887] [1] Setup launched task 'Start-PreSetup -Mode 'Install' -Roles 'ClientAccessRole''  
    [03.28.2012 07:22:12.0418] [1] Параметры сеанса Active Directory для 'Start-PreSetup': Просмотреть весь лес: 'True', Контроллер домена конфигурации: "srv1.classic.ru", Предпочтительный глобальный каталог: "srv1.classic.ru", Предпочтительные контроллеры домена: "{ srv1.classic.ru }"
    [03.28.2012 07:22:12.0449] [1] Beginning processing Start-PreSetup -Mode:'Install' -Roles:'ClientAccessRole'
    [03.28.2012 07:22:12.0527] [1] Loaded component 'All Roles Pre Setup' with 3 task information blocks from 'res://AllRolesPreSetupComponent.xml'
    [03.28.2012 07:22:12.0527] [1] Loaded component 'Datacenter All Roles PreSetup' with 1 task information blocks from 'res://DatacenterAllRolesPreSetupComponent.xml'
    [03.28.2012 07:22:12.0527] [1] Loaded component 'Client Access PreSetup' with 1 task information blocks from 'res://ClientAccessPreSetupComponent.xml'
    [03.28.2012 07:22:12.0527] [1] Loaded component 'Datacenter Client Access PreSetup' with 1 task information blocks from 'res://DatacenterClientAccessPreSetupComponent.xml'
    [03.28.2012 07:22:12.0543] [1] Loaded component 'All Roles Pre Setup Last' with 1 task information blocks from 'res://AllRolesPreSetupLastComponent.xml'
    [03.28.2012 07:22:13.0074] [1] Loaded 7 parameters from the configuration file "C:\Program Files\Microsoft\Exchange Server\V14\bin\EnterpriseServiceEndpointsConfig.xml".
    [03.28.2012 07:22:13.0074] [1] Writing informational script to 'C:\ExchangeSetupLogs\Start-PreSetup-20120328-16221205431579438218.ps1'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleBinPath = 'C:\Program Files\Microsoft\Exchange Server\V14\Bin'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterPath = 'C:\Program Files\Microsoft\Exchange Server\V14\Datacenter'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterServiceEndpointABCHContactService = '<ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterServiceEndpointDomainPartnerManageDelegation = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterServiceEndpointDomainPartnerManageDelegation2 = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation2.asmx</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterServiceEndpointLiveFederationMetadata = '<ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterServiceEndpointLiveGetUserRealm = '<ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterServiceEndpointLiveServiceLogin2 = '<ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleDatacenterServiceEndpointMsoFederationMetadata = '<ServiceEndpoint><Url>https://nexus.microsoftonline-p.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleInstallationMode = 'Install'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V14\'
    [03.28.2012 07:22:13.0090] [1] Executing: $RoleInvocationID = '20120328-16221205431579438218'
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleIsDatacenter = $False
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleIsPartnerHosted = $False
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleIsServerSbs = $False
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleLoggingPath = 'C:\Program Files\Microsoft\Exchange Server\V14\Logging'
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleMsiInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V14\'
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleMsiInstallPathBin = 'C:\Program Files\Microsoft\Exchange Server\V14\Bin'
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleProductPlatform = 'amd64'
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleRoles = 'ClientAccessRole'
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleSetupLoggingPath = 'C:\ExchangeSetupLogs'
    [03.28.2012 07:22:13.0105] [1] Executing: $RoleTargetVersion = '14.01.0218.015'
    [03.28.2012 07:22:13.0105] [1] 0 tasks were found to execute.
    [03.28.2012 07:22:13.0105] [1] Processing component 'All Roles Pre Setup' (Идет подготовка установки для всех ролей сервера Exchange.).
    [03.28.2012 07:22:13.0105] [1] Processing component 'Client Access PreSetup' (Идет подготовка установки для роли сервера клиентского доступа.).
    [03.28.2012 07:22:13.0105] [1] Processing component 'All Roles Pre Setup Last' (Настройка сервера.).
    [03.28.2012 07:22:13.0105] [1] Finished executing component tasks.
    [03.28.2012 07:22:13.0121] [1] Ending processing Start-PreSetup
    [03.28.2012 07:22:13.0121] [0] **************
    [03.28.2012 07:22:13.0121] [0] Setup will run the task 'Install-ClientAccessRole'
    [03.28.2012 07:22:13.0121] [1] Setup launched task 'Install-ClientAccessRole -DomainController 'srv1.classic.ru' -updatesdir 'E:\Updates''  
    [03.28.2012 07:22:13.0136] [1] Параметры сеанса Active Directory для 'Install-ClientAccessRole': Просмотреть весь лес: 'True', Контроллер домена конфигурации: "srv1.classic.ru", Предпочтительный глобальный каталог: "srv1.classic.ru", Предпочтительные контроллеры домена: "{ srv1.classic.ru }"
    [03.28.2012 07:22:13.0136] [1] Beginning processing Install-ClientAccessRole -DomainController:'srv1.classic.ru' -UpdatesDir:'E:\Updates'
    [03.28.2012 07:22:13.0152] [1] Attempting Install for ClientAccessRole.
    [03.28.2012 07:22:13.0152] [1] The following roles are installed: BridgeheadRole AdminToolsRole  
    [03.28.2012 07:22:13.0152] [1] The following roles are current: BridgeheadRole AdminToolsRole  
    [03.28.2012 07:22:13.0683] [1] Reading components for the role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [03.28.2012 07:22:13.0683] [1] Found 41 components
    [03.28.2012 07:22:13.0683] [1] Loaded component 'All Roles Common First - Run Once' with 2 task information blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [03.28.2012 07:22:13.0683] [1] Loaded component 'All Roles Common First' with 8 task information blocks from 'res://AllRolesCommonFirst.xml'
    [03.28.2012 07:22:13.0699] [1] Loaded component 'All Roles Precompile Management Binaries' with 36 task information blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [03.28.2012 07:22:13.0699] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task information blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [03.28.2012 07:22:13.0699] [1] Loaded component 'Common Perf Counters ' with 4 task information blocks from 'res://CommonPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0699] [1] Loaded component 'Provision Server' with 10 task information blocks from 'res://ProvisionServerComponent.xml'
    [03.28.2012 07:22:13.0699] [1] Loaded component 'All Active-Directory Roles Common' with 10 task information blocks from 'res://AllADRolesCommon.xml'
    [03.28.2012 07:22:13.0699] [1] Loaded component 'Datacenter Server License' with 1 task information blocks from 'res://DatacenterLicenseServer.xml'
    [03.28.2012 07:22:13.0714] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task information blocks from 'res://LegacyMTAComponent.xml'
    [03.28.2012 07:22:13.0714] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task information blocks from 'res://LegacySMTPComponent.xml'
    [03.28.2012 07:22:13.0714] [1] Loaded component 'Transport Perf Counters' with 32 task information blocks from 'res://TransportPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0714] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task information blocks from 'res://RpcEpmapFirewallException.xml'
    [03.28.2012 07:22:13.0714] [1] Loaded component 'Enable Remote IIS Admin RPC firewall exception' with 1 task information blocks from 'res://RemoteIISAdminFirewallException.xml'
    [03.28.2012 07:22:13.0714] [1] Loaded component 'Bridgehead Role Setter' with 3 task information blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [03.28.2012 07:22:13.0714] [1] Loaded component 'Transport Common Configuration' with 23 task information blocks from 'res://TransportCommonComponent.xml'
    [03.28.2012 07:22:13.0730] [1] Loaded component 'Bridgehead Perf Counters' with 25 task information blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0730] [1] Loaded component 'MSFTE Configuration' with 1 task information blocks from 'res://MsFteComponent.xml'
    [03.28.2012 07:22:13.0730] [1] Loaded component 'Bridgehead Configuration' with 45 task information blocks from 'res://BridgeheadComponent.xml'
    [03.28.2012 07:22:13.0730] [1] Loaded component 'Transport Log Search Service' with 2 task information blocks from 'res://TransportLogSearchServiceComponent.xml'
    [03.28.2012 07:22:13.0730] [1] Loaded component 'Data Storage Configuration' with 1 task information blocks from 'res://DataStorageComponent.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'Monitoring Service Configuration' with 5 task information blocks from 'res://MonitoringComponent.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'Service Host Configuration' with 3 task information blocks from 'res://ServiceHostComponent.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'Protected Service Host Configuration' with 3 task information blocks from 'res://ProtectedServiceHostComponent.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'BridgeheadExchangeCertificate' with 1 task information blocks from 'res://BridgeheadExchangeCertificate.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'PowerShell Configuration' with 4 task information blocks from 'res://PowerShellComponent.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'WSMan IIS Hosting Configuration' with 1 task information blocks from 'res://WSManIISHostingConfigurationComponent.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'Active Directory Topology Service Configuration' with 3 task information blocks from 'res://AllADRolesCommonServiceControl.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'Bridgehead Service Configuration' with 3 task information blocks from 'res://BridgeheadServiceControl.xml'
    [03.28.2012 07:22:13.0746] [1] Loaded component 'Transport Common Service Control' with 1 task information blocks from 'res://TransportCommonServiceControl.xml'
    [03.28.2012 07:22:13.0761] [1] Loaded component 'Service Host Service Control' with 1 task information blocks from 'res://ServiceHostServiceControl.xml'
    [03.28.2012 07:22:13.0761] [1] Loaded component 'Protected Service Host Service Control' with 1 task information blocks from 'res://ProtectedServiceHostServiceControl.xml'
    [03.28.2012 07:22:13.0793] [1] Loaded component 'Datacenter Common Configuration' with 6 task information blocks from 'res://DatacenterAllRolesCommonFirst.xml'
    [03.28.2012 07:22:13.0793] [1] Loaded component 'Datacenter ServiceHost Configuration' with 1 task information blocks from 'res://DatacenterServiceHostComponent.xml'
    [03.28.2012 07:22:13.0793] [1] Loaded component 'Datacenter Live ID perf Counters' with 1 task information blocks from 'res://DatacenterLiveIDPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0793] [1] Loaded component 'Datacenter Bridgehead Configuration' with 22 task information blocks from 'res://DatacenterBridgeheadComponent.xml'
    [03.28.2012 07:22:13.0793] [1] Loaded component 'Datacenter Bridgehead Perf Counters' with 8 task information blocks from 'res://DatacenterBridgeheadPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0793] [1] Loaded component 'Datacenter All Roles LiveID RPS Configuration' with 3 task information blocks from 'res://DatacenterLiveIdRpsComponent.xml'
    [03.28.2012 07:22:13.0793] [1] Loaded component 'Datacenter Common Configuration Last' with 3 task information blocks from 'res://DatacenterAllRolesCommonLast.xml'
    [03.28.2012 07:22:13.0808] [1] Loaded component 'All Roles Common Last' with 6 task information blocks from 'res://AllRolesCommonLast.xml'
    [03.28.2012 07:22:13.0808] [1] Loaded component 'BridgeheadSBSComponent' with 2 task information blocks from 'res://SbsBridgeHeadComponent.xml'
    [03.28.2012 07:22:13.0808] [1] Loaded component 'Common SBS Configuration' with 1 task information blocks from 'res://SbsAllRolesCommonLast.xml'
    [03.28.2012 07:22:13.0808] [1] Reading components for the role 'AdminToolsRole' from 'res://AdminToolsRoleDefinition.xml'
    [03.28.2012 07:22:13.0808] [1] Found 5 components
    [03.28.2012 07:22:13.0808] [1] Loaded component 'All Roles Common First - Run Once' with 2 task information blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [03.28.2012 07:22:13.0808] [1] Loaded component 'All Roles Common First' with 8 task information blocks from 'res://AllRolesCommonFirst.xml'
    [03.28.2012 07:22:13.0808] [1] Loaded component 'Datacenter File Copy Component' with 1 task information blocks from 'res://DatacenterFileCopyComponent.xml'
    [03.28.2012 07:22:13.0808] [1] Loaded component 'Datacenter Admin Tools Component' with 1 task information blocks from 'res://DatacenterAdminToolsComponent.xml'
    [03.28.2012 07:22:13.0824] [1] Loaded component 'All Roles Common Last' with 6 task information blocks from 'res://AllRolesCommonLast.xml'
    [03.28.2012 07:22:13.0824] [1] Reading components for the role 'ClientAccessRole' from 'res://ClientAccessRoleDefinition.xml'
    [03.28.2012 07:22:13.0824] [1] Found 50 components
    [03.28.2012 07:22:13.0824] [1] Loaded component 'All Roles Common First - Run Once' with 2 task information blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [03.28.2012 07:22:13.0824] [1] Loaded component 'All Roles Common First' with 8 task information blocks from 'res://AllRolesCommonFirst.xml'
    [03.28.2012 07:22:13.0824] [1] Loaded component 'All Roles Precompile Management Binaries' with 36 task information blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [03.28.2012 07:22:13.0824] [1] Loaded component 'ClientAccess Permissions Configuration' with 1 task information blocks from 'res://ClientAccessLocalPermissionsComponent.xml'
    [03.28.2012 07:22:13.0824] [1] Loaded component 'Common Perf Counters ' with 4 task information blocks from 'res://CommonPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0839] [1] Loaded component 'Provision Server' with 10 task information blocks from 'res://ProvisionServerComponent.xml'
    [03.28.2012 07:22:13.0839] [1] Loaded component 'All Active-Directory Roles Common' with 10 task information blocks from 'res://AllADRolesCommon.xml'
    [03.28.2012 07:22:13.0839] [1] Loaded component 'Datacenter Server License' with 1 task information blocks from 'res://DatacenterLicenseServer.xml'
    [03.28.2012 07:22:13.0839] [1] Loaded component 'Exchange 2003 Registry Configuration' with 1 task information blocks from 'res://LegacyRegistryMarkersComponent.xml'
    [03.28.2012 07:22:13.0839] [1] Loaded component 'Client Access Perf Counters' with 27 task information blocks from 'res://ClientAccessPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0839] [1] Loaded component 'Client Access Configuration' with 22 task information blocks from 'res://ClientAccessComponent.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'POP/IMAP Configuration' with 12 task information blocks from 'res://PopImapComponent.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'ClientAccessExchangeCertificate' with 1 task information blocks from 'res://ClientAccessExchangeCertificate.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'OWA Configuration' with 10 task information blocks from 'res://ClientAccessOwaComponent.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'ECP Configuration' with 3 task information blocks from 'res://ClientAccessEcpComponent.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'RPC-over-HTTP Proxy Configuration' with 4 task information blocks from 'res://ClientAccessRpcProxyComponent.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'Client Access Services Configuration' with 20 task information blocks from 'res://ServicesComponent.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'Data Storage Configuration' with 1 task information blocks from 'res://DataStorageComponent.xml'
    [03.28.2012 07:22:13.0855] [1] Loaded component 'Service Host Configuration' with 3 task information blocks from 'res://ServiceHostComponent.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'Protected Service Host Configuration' with 3 task information blocks from 'res://ProtectedServiceHostComponent.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'RPC Client Access Service Configuration' with 4 task information blocks from 'res://RpcClientAccessComponent.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'RPC Client Access Protocol Configuration' with 1 task information blocks from 'res://RpcClientAccessConfiguration.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'Address Book Service Configuration' with 3 task information blocks from 'res://AddressBookComponent.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task information blocks from 'res://RpcEpmapFirewallException.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'Enable Remote IIS Admin RPC firewall exception' with 1 task information blocks from 'res://RemoteIISAdminFirewallException.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'Enable RPC over HTTP redirector firewall exception' with 1 task information blocks from 'res://RpcHttpRedirectorException.xml'
    [03.28.2012 07:22:13.0871] [1] Loaded component 'Monitoring Service Configuration' with 5 task information blocks from 'res://MonitoringComponent.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'PowerShell Configuration' with 4 task information blocks from 'res://PowerShellComponent.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'File Distribution Service OAB Perf Counters' with 1 task information blocks from 'res://FDS_OAB_PerfCountersComponent.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'File Distribution Service Group Metrics Perf Counters' with 1 task information blocks from 'res://FDS_GM_PerfCountersComponent.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'File Distribution Service Configuration' with 1 task information blocks from 'res://FileDistributionServiceComponent.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'WSMan IIS Hosting Configuration' with 1 task information blocks from 'res://WSManIISHostingConfigurationComponent.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'Active Directory Topology Service Configuration' with 3 task information blocks from 'res://AllADRolesCommonServiceControl.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'Client Access Service Control' with 1 task information blocks from 'res://ClientAccessServiceControl.xml'
    [03.28.2012 07:22:13.0886] [1] Loaded component 'Service Host Service Control' with 1 task information blocks from 'res://ServiceHostServiceControl.xml'
    [03.28.2012 07:22:13.0902] [1] Loaded component 'Protected Service Host Service Control' with 1 task information blocks from 'res://ProtectedServiceHostServiceControl.xml'
    [03.28.2012 07:22:13.0902] [1] Loaded component 'RPC Client Access Service Control' with 1 task information blocks from 'res://RpcClientAccessServiceControl.xml'
    [03.28.2012 07:22:13.0902] [1] Loaded component 'File distribution Service Control' with 1 task information blocks from 'res://FileDistributionServiceControl.xml'
    [03.28.2012 07:22:13.0902] [1] Loaded component 'Datacenter Common Configuration' with 6 task information blocks from 'res://DatacenterAllRolesCommonFirst.xml'
    [03.28.2012 07:22:13.0902] [1] Loaded component 'Datacenter Client Access Perf Counters' with 9 task information blocks from 'res://DatacenterClientAccessPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0902] [1] Loaded component 'Datacenter ServiceHost Configuration' with 1 task information blocks from 'res://DatacenterServiceHostComponent.xml'
    [03.28.2012 07:22:13.0902] [1] Loaded component 'Datacenter Live ID perf Counters' with 1 task information blocks from 'res://DatacenterLiveIDPerfCountersComponent.xml'
    [03.28.2012 07:22:13.0949] [1] Loaded component 'Datacenter Client Access Configuration' with 97 task information blocks from 'res://DatacenterClientAccessComponent.xml'
    [03.28.2012 07:22:13.0949] [1] Loaded component 'Datacenter All Roles LiveID RPS Configuration' with 3 task information blocks from 'res://DatacenterLiveIdRpsComponent.xml'
    [03.28.2012 07:22:13.0949] [1] Loaded component 'Datacenter Transport Log Search Service' with 2 task information blocks from 'res://DatacenterTransportLogSearchServiceComponent.xml'
    [03.28.2012 07:22:13.0949] [1] Loaded component 'Datacenter Common Configuration Last' with 3 task information blocks from 'res://DatacenterAllRolesCommonLast.xml'
    [03.28.2012 07:22:13.0949] [1] Loaded component 'All Roles Common Last' with 6 task information blocks from 'res://AllRolesCommonLast.xml'
    [03.28.2012 07:22:13.0949] [1] Loaded component 'Client Access SBS Configuration' with 2 task information blocks from 'res://SbsClientAccessComponent.xml'
    [03.28.2012 07:22:13.0964] [1] Loaded component 'Common SBS Configuration' with 1 task information blocks from 'res://SbsAllRolesCommonLast.xml'
    [03.28.2012 07:22:13.0964] [1] Loaded component 'Partner Hosted Client Access Configuration' with 1 task information blocks from 'res://PartnerHostedClientAccessComponent.xml'
    [03.28.2012 07:22:13.0964] [1] The component 'All Roles Common First - Run Once' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding 'All Roles Common First' because it's marked AlwaysExecute.
    [03.28.2012 07:22:13.0964] [1] The component 'All Roles Precompile Management Binaries' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'ClientAccess Permissions Configuration'
    [03.28.2012 07:22:13.0964] [1] The component 'Common Perf Counters ' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Provision Server' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'All Active-Directory Roles Common' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Datacenter Server License' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Exchange 2003 Registry Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Client Access Perf Counters'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Client Access Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'POP/IMAP Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'ClientAccessExchangeCertificate'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'OWA Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'ECP Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'RPC-over-HTTP Proxy Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Client Access Services Configuration'
    [03.28.2012 07:22:13.0964] [1] The component 'Data Storage Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Service Host Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Protected Service Host Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'RPC Client Access Service Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'RPC Client Access Protocol Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Address Book Service Configuration'
    [03.28.2012 07:22:13.0964] [1] The component 'Enable RPC-EPMAP firewall exception' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Enable Remote IIS Admin RPC firewall exception' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Enable RPC over HTTP redirector firewall exception'
    [03.28.2012 07:22:13.0964] [1] The component 'Monitoring Service Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'PowerShell Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'File Distribution Service OAB Perf Counters'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'File Distribution Service Group Metrics Perf Counters'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'File Distribution Service Configuration'
    [03.28.2012 07:22:13.0964] [1] The component 'WSMan IIS Hosting Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Active Directory Topology Service Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Client Access Service Control'
    [03.28.2012 07:22:13.0964] [1] The component 'Service Host Service Control' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Protected Service Host Service Control' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'RPC Client Access Service Control'
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'File distribution Service Control'
    [03.28.2012 07:22:13.0964] [1] The component 'Datacenter Common Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Datacenter Client Access Perf Counters'
    [03.28.2012 07:22:13.0964] [1] The component 'Datacenter ServiceHost Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] The component 'Datacenter Live ID perf Counters' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Datacenter Client Access Configuration'
    [03.28.2012 07:22:13.0964] [1] The component 'Datacenter All Roles LiveID RPS Configuration' is shared with a role that's already configured.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Datacenter Transport Log Search Service'
    [03.28.2012 07:22:13.0964] [1] Adding 'Datacenter Common Configuration Last' because it's marked AlwaysExecute.
    [03.28.2012 07:22:13.0964] [1] Adding 'All Roles Common Last' because it's marked AlwaysExecute.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Client Access SBS Configuration'
    [03.28.2012 07:22:13.0964] [1] Adding 'Common SBS Configuration' because it's marked AlwaysExecute.
    [03.28.2012 07:22:13.0964] [1] Adding unique component 'Partner Hosted Client Access Configuration'
    [03.28.2012 07:22:13.0964] [1] The following roles are installed: BridgeheadRole AdminToolsRole  
    [03.28.2012 07:22:13.0964] [1] Loaded 7 parameters from the configuration file "C:\Program Files\Microsoft\Exchange Server\V14\bin\EnterpriseServiceEndpointsConfig.xml".
    [03.28.2012 07:22:13.0964] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-ClientAccessRole-20120328-16221309641577296201.ps1'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleBinPath = 'C:\Program Files\Microsoft\Exchange Server\V14\Bin'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleCustomerFeedbackEnabled = $null
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterPath = 'C:\Program Files\Microsoft\Exchange Server\V14\Datacenter'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterServiceEndpointABCHContactService = '<ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterServiceEndpointDomainPartnerManageDelegation = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterServiceEndpointDomainPartnerManageDelegation2 = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation2.asmx</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterServiceEndpointLiveFederationMetadata = '<ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterServiceEndpointLiveGetUserRealm = '<ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterServiceEndpointLiveServiceLogin2 = '<ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDatacenterServiceEndpointMsoFederationMetadata = '<ServiceEndpoint><Url>https://nexus.microsoftonline-p.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleDomainController = 'srv1.classic.ru'
    [03.28.2012 07:22:13.0964] [1] Executing: $RoleExternalCASServerDomain = $null
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleFqdnOrName = 'exchange.classic.ru'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleInstallationMode = 'Install'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V14\'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleInvocationID = '20120328-16221309641577296201'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleIsAdminToolsRoleInstalled = $True
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleIsBridgeheadRoleInstalled = $True
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleIsDatacenter = $False
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleIsPartnerHosted = $False
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleIsServerSbs = $False
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleLanguagePacksPath = 'E:\'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleLoggedOnUser = 'CLASSIC\admin'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleLoggingPath = 'C:\Program Files\Microsoft\Exchange Server\V14\Logging'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleNetBIOSName = 'EXCHANGE'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleNoSelfSignedCertificates = $False
    [03.28.2012 07:22:13.0980] [1] Executing: $RolePreviousVersion = $null
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleProductPlatform = 'amd64'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleRoleName = 'ClientAccessRole'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleRoles = 'BridgeheadRole,AdminToolsRole'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleSetupLoggingPath = 'C:\ExchangeSetupLogs'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleTargetVersion = '14.01.0218.015'
    [03.28.2012 07:22:13.0980] [1] Executing: $RoleUpdatesDir = 'E:\Updates'
    [03.28.2012 07:22:13.0980] [1] Setup failed previously while performing the action Install.  Looking for the failed task with ID ClientAccessComponent___178a10624c88445093855c4ede7e9b9c.
    [03.28.2012 07:22:13.0980] [1] 119 tasks were found to execute.
    [03.28.2012 07:22:13.0980] [1] Processing component 'Client Access Configuration' (Идет настройка клиентского доступа.).
    [03.28.2012 07:22:13.0980] [1] Executing:  
              . "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";  
              Set-NtlmLoopbackCheck $false
             
    [03.28.2012 07:22:14.0011] [1] The following 2 error(s) occurred during task execution:
    [03.28.2012 07:22:14.0011] [1] 0.  ErrorRecord: Неожиданный токен "&" в выражении или инструкции.
    [03.28.2012 07:22:14.0011] [1] 0.  ErrorRecord: System.Management.Automation.ParseException: Неожиданный токен "&" в выражении или инструкции.
       в System.Management.Automation.Parser.PipelineRule()
       в System.Management.Automation.Parser.StatementRule()
       в System.Management.Automation.Parser.StatementListRule(Token start)
       в System.Management.Automation.Parser.ScriptBlockRule(String name, Boolean requireBrace, Boolean isFilter, ParameterDeclarationNode parameterDeclaration, List`1 functionComments, List`1 parameterComments)
       в System.Management.Automation.Parser.ParseScriptBlock(String input, Boolean interactiveInput)
       в System.Management.Automation.ExternalScriptInfo.get_ScriptBlock()
       в System.Management.Automation.CommandDiscovery.GetScriptAsCmdletProcessor(IScriptCommandInfo scriptCommandInfo, ExecutionContext context, Boolean useNewScope, Boolean fromScriptFile)
       в System.Management.Automation.CommandDiscovery.CreateScriptProcessorForSingleShell(ExternalScriptInfo scriptInfo, RunspaceConfigForSingleShell ssRunConfig, Boolean useLocalScope)
       в System.Management.Automation.CommandDiscovery.LookupCommandProcessor(CommandInfo commandInfo, CommandOrigin commandOrigin, Nullable`1 useLocalScope)
       в System.Management.Automation.CommandDiscovery.LookupCommandProcessor(String commandName, CommandOrigin commandOrigin, Nullable`1 useLocalScope)
       в System.Management.Automation.ExecutionContext.CreateCommand(String command)
       в System.Management.Automation.CommandNode.CreateCommandProcessor(Int32& index, ExecutionContext context)
       в System.Management.Automation.CommandNode.AddToPipeline(PipelineProcessor pipeline, ExecutionContext context)
       в System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
       в System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
    [03.28.2012 07:22:14.0011] [1] [ERROR] The following error was generated when "$error.Clear();  
              . "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";  
              Set-NtlmLoopbackCheck $false
            " was run: "Неожиданный токен "&" в выражении или инструкции.".
    [03.28.2012 07:22:14.0011] [1] [ERROR] Неожиданный токен "&" в выражении или инструкции.
    [03.28.2012 07:22:14.0011] [1] 1.  ErrorRecord: Имя "Set-NtlmLoopbackCheck" не распознано как имя командлета, функции, файла скрипта или выполняемой программы. Проверьте правильность написания имени, а также наличие и правильность пути, после чего повторите попытку.
    [03.28.2012 07:22:14.0011] [1] 1.  ErrorRecord: System.Management.Automation.CommandNotFoundException: Имя "Set-NtlmLoopbackCheck" не распознано как имя командлета, функции, файла скрипта или выполняемой программы. Проверьте правильность написания имени, а также наличие и правильность пути, после чего повторите попытку.
       в System.Management.Automation.CommandDiscovery.LookupCommandInfo(String commandName, CommandOrigin commandOrigin)
       в System.Management.Automation.CommandDiscovery.LookupCommandProcessor(String commandName, CommandOrigin commandOrigin, Nullable`1 useLocalScope)
       в System.Management.Automation.ExecutionContext.CreateCommand(String command)
       в System.Management.Automation.CommandNode.CreateCommandProcessor(Int32& index, ExecutionContext context)
       в System.Management.Automation.CommandNode.AddToPipeline(PipelineProcessor pipeline, ExecutionContext context)
       в System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
       в System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
    [03.28.2012 07:22:14.0011] [1] [ERROR] The following error was generated when "$error.Clear();  
              . "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";  
              Set-NtlmLoopbackCheck $false
            " was run: "Имя "Set-NtlmLoopbackCheck" не распознано как имя командлета, функции, файла скрипта или выполняемой программы. Проверьте правильность написания имени, а также наличие и правильность пути, после чего повторите попытку.".
    [03.28.2012 07:22:14.0011] [1] [ERROR] Имя "Set-NtlmLoopbackCheck" не распознано как имя командлета, функции, файла скрипта или выполняемой программы. Проверьте правильность написания имени, а также наличие и правильность пути, после чего повторите попытку.
    [03.28.2012 07:22:14.0011] [1] [ERROR-REFERENCE] Id=ClientAccessComponent___178a10624c88445093855c4ede7e9b9c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [03.28.2012 07:22:14.0011] [1] Setup is stopping now because of one or more critical errors.
    [03.28.2012 07:22:14.0011] [1] Finished executing component tasks.
    [03.28.2012 07:22:14.0027] [1] Ending processing Install-ClientAccessRole
    [03.28.2012 07:22:14.0027] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    [03.28.2012 07:22:14.0027] [0] End of Setup
    [03.28.2012 07:22:14.0027] [0] **********************************************

    Всего записей: 414 | Зарегистр. 23-04-2005 | Отправлено: 11:14 28-03-2012
    Открыть новую тему     Написать ответ в эту тему

    Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215

    Компьютерный форум Ru.Board » Компьютеры » В помощь системному администратору » Microsoft Exchange Server


    Реклама на форуме Ru.Board.

    Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
    Modified by Ru.B0ard
    © Ru.B0ard 2000-2024

    BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

    Рейтинг.ru