exwein
Full Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
[INFO] Jump2Loader(1)
Boot into Loader
Ldr_OK>vendor cmd enable
[INFO] Init GDP
[INFO] GDP_006019,Jul 30 2018,18:07:20,8215,664
NAND RESET
NANDType=1, IM LEG SLC (1.8V)
->SDR IF
SF CONFIG (2, 0)
SDR TMC
SF TMODE (1, 0)
SDR NPU
NEW PLL:001BAA97
SF ODS (10, 0)
[INFO] Check Interface
Check IF OK
Check DDR CONFIG OK
Check ODS OK
A2 CHIP!!
=====pParam=====
bFlashVendor: 4
bFlashType: 3
wBlocks: 2944
wExtend_blocks: 0
wPages: 3072
wPageSize: 16
bLuns: 1
bIsBOKB: 0
bPlanes: 4
bMode: 8
bLdpcMode: 0
bMaxChans: 1
bMaxBanks: 1
bPhyChNum: 2
bPhyCeNum: 1
wDefectRatio: 133
bFunBitMap: 0x1
bScanFacMode: 0x1
bCwFormat[]:{3,0,0,1,1,0,0}
bFwCh[]:{1,255}
bFwBank[]:{0}
ldpc_encode.usr_len 810
ldpc_encode.par_len 100
h_matrix_offset: 10 h_matrix_length: 490
fi_offset: 4a0 ,fi_length: 190
sch_offset: 630 sch_length: 780
decA_offset: 10 h_matrix_length: 250
decB_offset: 260 h_matrix_length: 250
decC_offset: 4b0 h_matrix_length: 250
decD_offset: 700 h_matrix_length: 250
================
gbBlock_Shift: a
gbRow_Block_Shift: a
gbPage_Shift: c
gbRow_Page_Shift: c
gbLun_Shift: 0
gbPlane_Shift: 2
gbStpu_Shift: 7
gbCh_Shift: 0
gbCe_Shift: 0
gbCe_Num: 1
================
[INFO] Update GDP
Full CH Map = 0 1 FF FF
Full CE Map = 0 FF FF FF FF FF FF FF
(00) CH:0 BK:0 => CH:1 CE:0
DIE CNT:1
BK:0 CH CNT Per CE = 1
[INFO] Update Done.
vGDP_VD_GetThermal
Current IP0:0x00000000
Current IP1:0x00000001
Use TSCTRL data
TSCTRL (0xF0013C04) = 0x01820200
TSSTATUS (0xF0013C08) = 0x000102D1
TS_FW (0xF0013C0C) = 0x00000000
========================================
TRIM OP = 0x00000020
TRIM BG = 0x00000020
TRIM BG_R = 0x00000020
TSAD = 0x000002D0
TSAD:0x2D0
C:0 B:0 [ 89 D4 0C 32 AA 00 00 ]
[INFO] Check Flash Module
NAND RESET
NAND RESET
NAND RESET
C0 C1 C2 C3
CE0 { - O - - }
CE1 { - - - - }
CE2 { - - - - }
CE3 { - - - - }
CE4 { - - - - }
CE5 { - - - - }
CE6 { - - - - }
CE7 { - - - - }
CH NUM = 1
BANK NUM = 1
C:1 B:0 [ 89 D4 0C 32 AA 00 00 ]
-->[sata_ndt_xrst] 0
<--[sata_ndt_xrst]
-------------------------------------------------
-->[sata_ndt_xrst] 0
<--[sata_ndt_xrst]
[INFO] Jump2Loader(1)
Boot into Loader
Ldr_OK>vendor cmd enable
[INFO] Init GDP
[INFO] GDP_006019,Jul 30 2018,18:07:20,8215,664
NAND RESET
NANDType=1, IM LEG SLC (1.8V)
->SDR IF
SF CONFIG (2, 0)
SDR TMC
SF TMODE (1, 0)
SDR NPU
NEW PLL:001BAA97
SF ODS (10, 0)
[INFO] Check Interface
Check IF OK
Check DDR CONFIG OK
Check ODS OK
A2 CHIP!!
=====pParam=====
bFlashVendor: 4
bFlashType: 3
wBlocks: 2944
wExtend_blocks: 0
wPages: 3072
wPageSize: 16
bLuns: 1
bIsBOKB: 0
bPlanes: 4
bMode: 8
bLdpcMode: 0
bMaxChans: 1
bMaxBanks: 1
bPhyChNum: 2
bPhyCeNum: 1
wDefectRatio: 133
bFunBitMap: 0x1
bScanFacMode: 0x1
bCwFormat[]:{3,0,0,1,1,0,0}
bFwCh[]:{1,255}
bFwBank[]:{0}
ldpc_encode.usr_len 810
ldpc_encode.par_len 100
h_matrix_offset: 10 h_matrix_length: 490
fi_offset: 4a0 ,fi_length: 190
sch_offset: 630 sch_length: 780
decA_offset: 10 h_matrix_length: 250
decB_offset: 260 h_matrix_length: 250
decC_offset: 4b0 h_matrix_length: 250
decD_offset: 700 h_matrix_length: 250
================
gbBlock_Shift: a
gbRow_Block_Shift: a
gbPage_Shift: c
gbRow_Page_Shift: c
gbLun_Shift: 0
gbPlane_Shift: 2
gbStpu_Shift: 7
gbCh_Shift: 0
gbCe_Shift: 0
gbCe_Num: 1
================
[INFO] Update GDP
Full CH Map = 0 1 FF FF
Full CE Map = 0 FF FF FF FF FF FF FF
(00) CH:0 BK:0 => CH:1 CE:0
DIE CNT:1
BK:0 CH CNT Per CE = 1
[INFO] Update Done.
vGDP_VD_GetThermal
Current IP0:0x00000000
Current IP1:0x00000001
Use TSCTRL data
TSCTRL (0xF0013C04) = 0x01820200
TSSTAUS (0xF0013C08) = 0x000102CB
TS_FW (0xF0013C0C) = 0x00000000
========================================
TRIM OP = 0x00000020
TRIM BG = 0x00000020
TRIM BG_R = 0x00000020
TSAD = 0x000002CD
TSAD:0x2CB
[INFO] Test SB
Test Addr-Decoder OK
Test pattern 0x55AA OK
Test pattern 0xAA55 OK
Test SB: OK
[INFO] Test NAND Reset
NAND RESET
C:0 B:0 [ 89 D4 0C 32 AA 00 00 ]
Test Nand Reset: OK
[INFO] Test Data Path, Threshold=1
Test Data Path OK
[INFO] Test LDPC Engine
Test LDPC Engine with Mode 0
[CH00]
Data Match
Test LDPC Engine OK
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:0) PG:0 | TO
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:1) PG:0 | TO
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:2) PG:0 | TO
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:3) PG:0 | TO
[INFO] Pspam_detected Code Block
Check Code Block, ODB=0, bCB_THRD=0
BU:0 ERASE OK > PROGRAM OK > READ OK > ERASE OK.
ALL DIES'S PLANE STATUS(x:DNOT CARE):
CH:00 BANK={ 00:1111 }
[INFO] Get Code Block
Scan Result From BU 735 to 2
DONE
vGDP_VD_GetResultBlock
GET LOG[4]
GET LOG[0]
GET LOG[0]
GET LOG[0]
[LOG] ER C:0 B:0(CE:0) L:0 BU:00DC(P:1) PG:0 | F(1)
GET LOG[1]
GET LOG[0]
GET LOG[0]
GET LOG[0]
GET LOG[0]
-->[sata_ndt_xrst] 0
<--[sata_ndt_xrst]
----------------------------------------------------
-->[sata_ndt_xrst] 0
<--[sata_ndt_xrst]
GET LOG[0]
GET LOG[0]
GET LOG[0]
GET LOG[0]
GET LOG[0]
[LOG] ER C:0 B:0(CE:0) L:0 BU:02BB(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02C2(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02C5(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D3(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D4(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D5(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D6(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D7(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D7(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D8(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D8(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D8(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D9(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D9(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02D9(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DA(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DA(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DA(P:2) PG:0 | F(2)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DA(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DB(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DB(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DB(P:2) PG:0 | F(2)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DB(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DC(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DC(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DC(P:2) PG:0 | F(2)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DC(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DD(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DD(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DD(P:2) PG:0 | F(2)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DD(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DE(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DE(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DE(P:2) PG:0 | F(2)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DE(P:3) PG:0 | F(3)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DF(P:0) PG:0 | F(0)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DF(P:1) PG:0 | F(1)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DF(P:2) PG:0 | F(2)
[LOG] ER C:0 B:0(CE:0) L:0 BU:02DF(P:3) PG:0 | F(3)
GET LOG[39]
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:0) PG:0 | TO
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:1) PG:0 | TO
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:2) PG:0 | TO
[LOG] ER C:0 B:0(CE:0) L:0 BU:0000(P:3) PG:0 | TO
GET LOG[4] |
Всего записей: 599 | Зарегистр. 29-03-2016 | Отправлено: 22:15 11-09-2021 | Исправлено: exwein, 22:40 12-09-2021 |
|
