superdigger
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору вот попробовал еще раз [more][liveuser@localhost ~]$ su [root@localhost liveuser]# lsscsi [0:0:0:0] disk ATA OCZ-VERTEX3 2.25 /dev/sda [2:0:0:0] disk ATA WDC WD2500AAJS-0 01.0 /dev/sdb [4:0:0:0] disk ATA Hitachi HDS72103 JPFO /dev/sdc [5:0:0:0] disk ATA SandForce{200026 306A /dev/sdd [6:0:0:0] disk Verbatim STORE N GO 8.07 /dev/sde [7:0:0:0] disk JetFlash Transcend 16GB 8.07 /dev/sdf [root@localhost liveuser]# /media/W7_PRO_VL_S/1/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 5:0:0:0 /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/FW_PPRO_6_0_9_Release.1129404.release.0.mfp /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/Configuration_Files/28180.0.driveconfig 12345 WWW_123 log=/media/W7_PRO_VL_S/firm1/fw.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Thu 06/15/2023 23:59:32] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 5:0:0:0 argv[3]: /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/FW_PPRO_6_0_9_Release.1129404.release.0.mfp argv[4]: /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/Configuration_Files/28180.0.driveconfig argv[5]: 12345 argv[6]: WWW_123 argv[7]: log=/media/W7_PRO_VL_S/firm1/fw.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Thu 06/15/2023 23:59:32] - Instructing the operating system to purge any existing cached data for device: '5:0:0:0' [Thu 06/15/2023 23:59:37] - Issuing a discovery command for device: '5:0:0:0' [Thu 06/15/2023 23:59:42] - Discovery command completed... [Thu 06/15/2023 23:59:42] - Waiting 5 seconds for the system to settle... [Thu 06/15/2023 23:59:47] - Device designation string '5:0:0:0' is mapped to node '/dev/sg3' [Thu 06/15/2023 23:59:47] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg3 MFP Package Filename = /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/FW_PPRO_6_0_9_Release.1129404.release.0.mfp Configuration File = /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/Configuration_Files/28180.0.driveconfig Serial No. = 12345 World Wide Name = WWW_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Thu 06/15/2023 23:59:47] - Successfully received the IDENTIFY data from the drive... [Thu 06/15/2023 23:59:47] - Validating Manufacturing Firmware Package: /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/FW_PPRO_6_0_9_Release.1129404.release.0.mfp [Thu 06/15/2023 23:59:47] - Successfully opened the package: /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/FW_PPRO_6_0_9_Release.1129404.release.0.mfp [Thu 06/15/2023 23:59:47] - file /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/Configuration_Files/28180.0.driveconfig Loaded successfully [Thu 06/15/2023 23:59:47] - Warning: Unable to query diagnostics information to perform power management settings check [Thu 06/15/2023 23:59:47] - B01 Power Management configuration request detected [Thu 06/15/2023 23:59:47] - Successfully extracted *.DriveConfig file: /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/Configuration_Files/28180.0.driveconfig [Thu 06/15/2023 23:59:47] - Extracted Config_ID: 1 (28180) in DriveConfig file: /media/W7_PRO_VL_S/firm1/FW_PPRO_6_0_9_Release.1129404.release--0/Configuration_Files/28180.0.driveconfig [Thu 06/15/2023 23:59:47] - Extracted SerialOutputControl: 0 [Thu 06/15/2023 23:59:47] - Searching for flashware image for configuration 28180 [Thu 06/15/2023 23:59:47] - Manifest found for configuration 28180 [Thu 06/15/2023 23:59:47] - Flashware image extracted: 28180_fw_cl_mlc_Toshiba_B02_256Gb_TH58TEG8DDJTA20_1Q_2C_2D_PP_R01747_s512.vic [Thu 06/15/2023 23:59:47] - Searching for manufacturing image for configuration 28180 [Thu 06/15/2023 23:59:47] - Manifest found for configuration 28180 [Thu 06/15/2023 23:59:47] - Manufacturing image extracted: 28180_mf_mlc_Toshiba_B02_256Gb_TH58TEG8DDJTA20_1Q_2C_2D_PP_R01747_s512.vic [Thu 06/15/2023 23:59:47] - Proceeding in ROM mode, download feature 3... [Thu 06/15/2023 23:59:48] - Successfully downloaded MFB to the drive... [Thu 06/15/2023 23:59:48] - Waiting (5 sec) for the drive to settle... [Thu 06/15/2023 23:59:53] - Successfully received the IDENTIFY data from the drive... [Thu 06/15/2023 23:59:53] - Firmware revision reported to be: '609ABBM0'. This indicates MFB download was successful. [Thu 06/15/2023 23:59:53] - Successfully enabled SMART capabilities... [Thu 06/15/2023 23:59:55] - Successfully issued a diagnostic unlock... [Thu 06/15/2023 23:59:56] - Performing the flash test of block 0 (0x0000)... [Thu 06/15/2023 23:59:58] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 1 Chip Enabled Count: 2 Die Count: 2 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 1 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 1 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 1 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 1 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 1 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 1 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 1 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 1 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 16 Number of failures: 0 Number of Passed with warnings: 0 No. Passed without warnings: 16 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Thu 06/15/2023 23:59:58] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ MemoryWearCycleCapability = 0 CurrentPE_CycleCount = 0 LifeInSeconds = 0 LogicalCapacity = 250069680 SectorSize = 512 SectorAlignmentOffset = 0 ExpectedMemoryID = 15000 (0x3A98) ExpectedNumDies = 0 SerialOutputControl = 0 Time[8] = 0x0000000000000000 MiscFlag_Erase_R_Block = 0 MiscFlag_PanicHandlingEnabled = 0 MiscFlag_PanicOnSATA_Error = 0 MiscFlag_WriteThrottlingTestMode = 0 MiscFlag_DisableUserBandECCX = 1 L_PageSize = 0 E_PageSize = 0 ErrorCorrectionPower = 0 ConfigDeviceReadDisturbCount = 0 ConfigDeviceReadDisturbCountLow = 0 ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Fri 06/16/2023 00:00:14] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format)) [Fri 06/16/2023 00:00:14] - End of Genesis manufacturing log. [Fri 06/16/2023 00:00:14] - Exiting... [Fri 06/16/2023 00:00:14] - Overall Result for Device: /dev/sg3 ****** FAIL ****** |