sandr4
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Я сам об этом написал, что всплывало... "Ваша память микрон MT29F128G08CFAAA, а вы суете в диск прошивку с памятью тошиба..." Этим я хотел показать, что проходит тест флеш-память, а на "родном" конфиге 22789 до этого даже не доходит.
[more=22789.log]<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Sat, 06/13/2020 @ 09:34:46
End Time: Sat, 06/13/2020 @ 09:39:37
OverallResult: FAIL
ExitCode: (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
argv[4]: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/Configuration_Files/22789.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/SANDRO/Ready_Vertex3/NewLog/log.log
Log File: SF_Genesis_Main_Log__Sat_06.13.2020_09.34.46.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 3
DeviceName: /dev/sg3
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/13/2020 09:34:46] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
argv[4]: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/Configuration_Files/22789.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/SANDRO/Ready_Vertex3/NewLog/log.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/13/2020 09:34:46] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0'
[Sat 06/13/2020 09:34:51] - Issuing a discovery command for device: '3:0:0:0'
[Sat 06/13/2020 09:34:57] - Discovery command completed...
[Sat 06/13/2020 09:34:57] - Waiting 5 seconds for the system to settle...
[Sat 06/13/2020 09:35:02] - Device designation string '3:0:0:0' is mapped to node '/dev/sg3'
[Sat 06/13/2020 09:35:02] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg3
MFP Package Filename = /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
Configuration File = /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/Configuration_Files/22789.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/13/2020 09:35:02] - Successfully received the IDENTIFY data from the drive...
[Sat 06/13/2020 09:35:02] - Validating Manufacturing Firmware Package: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
[Sat 06/13/2020 09:38:26] - Successfully opened the package: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
[Sat 06/13/2020 09:38:26] - file /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/Configuration_Files/22789.0.driveconfig Loaded successfully
[Sat 06/13/2020 09:38:27] - Warning: Unable to query diagnostics information to perform power management settings check
[Sat 06/13/2020 09:38:27] - B01 Power Management configuration request detected
[Sat 06/13/2020 09:38:27] - Successfully extracted *.DriveConfig file: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/Configuration_Files/22789.0.driveconfig
[Sat 06/13/2020 09:38:27] - Extracted Config_ID: 1 (22789) in DriveConfig file: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/Configuration_Files/22789.0.driveconfig
[Sat 06/13/2020 09:38:27] - Extracted SerialOutputControl: 0
[Sat 06/13/2020 09:38:31] - Searching for flashware image for configuration 22789
[Sat 06/13/2020 09:38:31] - Manifest found for configuration 22789
[Sat 06/13/2020 09:38:31] - Flashware image extracted: 22789_fw_cl_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_4C_1D_S_PP_R00719_s512.vic
[Sat 06/13/2020 09:38:31] - Searching for manufacturing image for configuration 22789
[Sat 06/13/2020 09:38:31] - Manifest found for configuration 22789
[Sat 06/13/2020 09:38:31] - Manufacturing image extracted: 22789_mf_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_4C_1D_S_PP_R00719_s512.vic
[Sat 06/13/2020 09:38:31] - Proceeding in ROM mode, download feature 3...
[Sat 06/13/2020 09:39:37] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 211.096798] sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 211.096801] sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
[ 211.096806] sd 3:0:0:0: [sdd] Add. Sense: No additional sense information
[ 211.096837] ata4.00: disabled
[ 216.088516] ata4: hard resetting link
[ 216.392432] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 216.392575] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND
[ 216.392582] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node f682f288), AE_NOT_FOUND
[ 216.393465] ata4.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 216.393470] ata4.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 216.397007] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND
[ 216.397015] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node f682f288), AE_NOT_FOUND
[ 216.399135] ata4.00: configured for UDMA/133
[ 216.399144] ata4: EH complete
[ 216.399362] scsi 3:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 216.400676] sd 3:0:0:0: [sdd] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 216.400680] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 216.400731] sd 3:0:0:0: [sdd] Write Protect is off
[ 216.400734] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 216.400756] sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 216.402160] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 216.402939] sdd: unknown partition table
[ 216.412189] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 441.113223] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 441.113230] ata4.00: failed command: DOWNLOAD MICROCODE
[ 441.113237] ata4.00: cmd 92/03:2e:00:00:02/00:00:00:00:00/00 tag 0 pio 23552 out
[ 441.113239] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 441.113242] ata4.00: status: { DRDY }
[ 441.113250] ata4: hard resetting link
[ 446.454168] ata4: link is slow to respond, please be patient (ready=0)
[ 451.134916] ata4: COMRESET failed (errno=-16)
[ 451.134922] ata4: hard resetting link
[ 456.476067] ata4: link is slow to respond, please be patient (ready=0)
[ 461.156810] ata4: COMRESET failed (errno=-16)
[ 461.156816] ata4: hard resetting link
[ 466.497964] ata4: link is slow to respond, please be patient (ready=0)
[ 496.108764] ata4: COMRESET failed (errno=-16)
[ 496.108772] ata4: limiting SATA link speed to 1.5 Gbps
[ 496.108775] ata4: hard resetting link
[ 501.144654] ata4: COMRESET failed (errno=-16)
[ 501.144660] ata4: reset failed, giving up
[ 501.144663] ata4.00: disabled
[ 501.144683] ata4: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/13/2020 09:39:37] - End of Genesis manufacturing log.
[Sat 06/13/2020 09:39:37] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Sat, 06/13/2020 @ 09:34:46 </Start_Time>
<End_Time> Sat, 06/13/2020 @ 09:39:37 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
argv[4]: /media/SANDRO/Ready_Vertex3/NewFL/FW_PPRO_6_0_A/Configuration_Files/22789.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/SANDRO/Ready_Vertex3/NewLog/log.log
</Input_Parameters>
<Log_File> SF_Genesis_Main_Log__Sat_06.13.2020_09.34.46.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 3 </Port_Number>
<Device_Name> /dev/sg3 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Sat 06/13/2020 09:39:37] - Overall Result for Device: /dev/sg3 ****** FAIL ******
|
