Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 4)

Модерирует : Akam1, Dr_StandBy, vertex4

 Версия для печати • ПодписатьсяДобавить в закладки
На первую страницук этому сообщениюк последнему сообщению

Открыть новую тему     Написать ответ в эту тему

antielvis

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
[root@localhost BOOT]# /media/BOOT/SF_1.7/SF_Genesis -PROCESS_SSD 3:0:0:0 /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29429.0.driveconfig 12345 www_123 log=/media/BOOT/my.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
 SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit  
 SF_Core Library: v1.7.1.20130612-fc14-32bit  
 
 Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
[Fri 06/26/2020 23:13:32] - SF_Genesis has been invoked with the following parameters:
 
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 3:0:0:0
                      argv[3]: /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
                      argv[4]: /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29429.0.driveconfig
                      argv[5]: 12345
                      argv[6]: www_123
                      argv[7]: log=/media/BOOT/my.log
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
[Fri 06/26/2020 23:13:32] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0'
[Fri 06/26/2020 23:13:38] - Issuing a discovery command for device: '3:0:0:0'
[Fri 06/26/2020 23:13:44] - Discovery command completed...
[Fri 06/26/2020 23:13:44] - Waiting 5 seconds for the system to settle...
[Fri 06/26/2020 23:13:49] - Device designation string '3:0:0:0' is mapped to node '/dev/sg1'
[Fri 06/26/2020 23:13:49] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg1
    MFP Package Filename = /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
      Configuration File = /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29429.0.driveconfig
              Serial No. = 12345
         World Wide Name = www_123
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Fri 06/26/2020 23:13:49] - Successfully received the IDENTIFY data from the drive...
[Fri 06/26/2020 23:13:49] - Validating Manufacturing Firmware Package: /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Fri 06/26/2020 23:13:49] - Successfully opened the package: /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Fri 06/26/2020 23:13:49] - file  /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29429.0.driveconfig Loaded successfully
[Fri 06/26/2020 23:13:49] - Warning:  Unable to query diagnostics information to perform power management settings check
[Fri 06/26/2020 23:13:49] - B01 Power Management configuration request detected
[Fri 06/26/2020 23:13:49] - Successfully extracted *.DriveConfig file: /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29429.0.driveconfig
[Fri 06/26/2020 23:13:49] - Extracted Config_ID: 1 (29429) in DriveConfig file: /media/BOOT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29429.0.driveconfig
[Fri 06/26/2020 23:13:49] - Extracted SerialOutputControl: 0
[Fri 06/26/2020 23:13:49] - Searching for flashware image for configuration 29429
[Fri 06/26/2020 23:13:49] - Manifest found for configuration 29429
[Fri 06/26/2020 23:13:49] - Flashware image extracted: 29429_fw_cl_mlc_Toshiba_64Gb_TC58TEG6DDKTA00_2Q_2C_1D_S_PP_R02419_s512.vic
[Fri 06/26/2020 23:13:49] - Searching for manufacturing image for configuration 29429
[Fri 06/26/2020 23:13:49] - Manifest found for configuration 29429
[Fri 06/26/2020 23:13:49] - Manufacturing image extracted: 29429_mf_mlc_Toshiba_64Gb_TC58TEG6DDKTA00_2Q_2C_1D_S_PP_R02419_s512.vic
[Fri 06/26/2020 23:13:49] - Proceeding in ROM mode, download feature 3...
[Fri 06/26/2020 23:13:49] - Successfully downloaded MFB to the drive...
[Fri 06/26/2020 23:13:49] - Waiting (5 sec) for the drive to settle...
[Fri 06/26/2020 23:13:54] - Successfully received the IDENTIFY data from the drive...
[Fri 06/26/2020 23:13:54] - Firmware revision reported to be: '582ABBM0'.  This indicates MFB download was successful.
[Fri 06/26/2020 23:13:54] - Successfully enabled SMART capabilities...
[Fri 06/26/2020 23:13:57] - Successfully issued a diagnostic unlock...
[Fri 06/26/2020 23:13:58] - Performing the flash test of block 0 (0x0000)...
[Fri 06/26/2020 23:14:01] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
 Flash Test Parameters:                              
-----------------------------------------------------------------------------
               Block Count: 0                      
                Page Count: 1                      
                 Bus Count: 2                      
        Chip Enabled Count: 2                      
                 Die Count: 1                      
                Lane Count: 4                      
               Plane Count: 2                      
-----------------------------------------------------------------------------
 Results Notes:                                      
-----------------------                              
   N1 - At least one page tested and passed with no bit errors.
   N2 - No test data available.  Test may have aborted, or failed during the testing.
   N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
   N4 - At least  one erased page tested had bit error rate greater than half the correction power.
   N5 - Walking zeros test failed.
   N6 - Walking ones test failed.
   N7 - Block contained factory bad block markings and testing was skipped.
   N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
   N9 - Block in plane 0 was marked as a factory bad block.
  N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
  N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
 
 
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus  | CE   | Die  | Lane | Value  | Result Notes                               | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 3    | 0x0003 | N1,N3                                      | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
 
 
-----------------------------------------------------------------------------
  Total Number of test results: 16                      
            Number of failures: 0                      
         Number of Passed with warnings: 1                      
      No. Passed without warnings: 15                      
-----------------------------------------------------------------------------
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Fri 06/26/2020 23:14:01] - Performing the FORMAT Command with the following parameters:  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         MemoryWearCycleCapability = 0  
              CurrentPE_CycleCount = 0  
                     LifeInSeconds = 0  
                   LogicalCapacity = 234441648  
                        SectorSize = 512  
             SectorAlignmentOffset = 0  
                  ExpectedMemoryID = 56984 (0xDE98)
                   ExpectedNumDies = 0  
               SerialOutputControl = 0  
                           Time[8] = 0x0000000000000000  
            MiscFlag_Erase_R_Block = 0  
     MiscFlag_PanicHandlingEnabled = 0  
        MiscFlag_PanicOnSATA_Error = 0  
  MiscFlag_WriteThrottlingTestMode = 0  
      MiscFlag_DisableUserBandECCX = 0  
                        L_PageSize = 0  
                        E_PageSize = 0  
              ErrorCorrectionPower = 0  
      ConfigDeviceReadDisturbCount = 0  
   ConfigDeviceReadDisturbCountLow = 0  
                  ExtraOptions_0_1 = 0  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Fri 06/26/2020 23:14:21] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format))
[Fri 06/26/2020 23:14:21] - End of Genesis manufacturing log.
[Fri 06/26/2020 23:14:21] - Exiting...
[Fri 06/26/2020 23:14:21] - Overall Result for Device: /dev/sg1 ****** FAIL ******

Всего записей: 111 | Зарегистр. 17-02-2006 | Отправлено: 00:00 27-06-2020
Открыть новую тему     Написать ответ в эту тему

На первую страницук этому сообщениюк последнему сообщению

Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 4)


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru