kpexa
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
[q][/q]
[liveuser@localhost ~]$ su
[root@localhost liveuser]# lsscsi
[1:0:0:0] disk ATA SandForce{200026 20DA /dev/sda
[6:0:0:0] disk JetFlash Transcend 4GB 8.07 /dev/sdb
[7:0:0:0] disk Generic Mass-Storage 1.11 /dev/sdc
[root@localhost liveuser]# /media/9016-2249/SandForce/5_SF_Genesis/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 1:0:0:0 /media/9016-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Release.906190.r16-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/9016-2249/SandForce/NewFolder/FPP_52_R0.driveconfig 12345 www_123 log=/media/9016-2249/SaW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22038.0.driveconfig 12345 www_123 log=/media/9016-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Rse19aseelease.906190.release--0/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 07/02/2020 15:27:33] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 1:0:0:0
argv[3]: /media/9016-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /media/9016-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22038.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/9016-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Release.906190.release--0/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 07/02/2020 15:27:33] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Thu 07/02/2020 15:30:44] - Issuing a discovery command for device: '1:0:0:0'
[Thu 07/02/2020 15:30:50] - Discovery command completed...
[Thu 07/02/2020 15:30:50] - Waiting 5 seconds for the system to settle...
[Thu 07/02/2020 15:30:55] - Device designation string '1:0:0:0' is mapped to node '/dev/sg0'
[Thu 07/02/2020 15:30:55] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /media/9016-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /media/9016-2249/SandForce/NewFolder/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22038.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 07/02/2020 15:31:07] - FATAL_ERROR: Could not get the IDENTIFY data from the drive... (0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x00EC (236)
ATA FEATURE : 0x0000 (0)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 0 (0x00) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 729.375410] ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 729.378427] ata2.00: configured for UDMA/133
[ 729.378453] ata2: EH complete
[ 729.378705] scsi 1:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 729.384911] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 729.387443] sd 1:0:0:0: [sda] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 729.387452] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 729.387562] sd 1:0:0:0: [sda] Write Protect is off
[ 729.387569] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 729.387617] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 729.389018] sda: unknown partition table
[ 729.398105] sd 1:0:0:0: [sda] Attached SCSI disk
[ 737.024278] ata2: drained 512 bytes to clear DRQ.
[ 737.024296] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 737.024308] ata2.00: failed command: IDENTIFY DEVICE
[ 737.024324] ata2.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 737.024327] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 737.024335] ata2.00: status: { DRDY }
[ 737.024349] ata2: hard resetting link
[ 737.024353] ata2: nv: skipping hardreset on occupied port
[ 737.478150] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 737.481413] ata2.00: configured for UDMA/133
[ 737.481462] ata2: EH complete
[ 745.024254] ata2: drained 512 bytes to clear DRQ.
[ 745.024292] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 745.024304] ata2.00: failed command: IDENTIFY DEVICE
[ 745.024321] ata2.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 745.024324] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 745.024334] ata2.00: status: { DRDY }
[ 745.024350] ata2: hard resetting link
[ 745.024356] ata2: nv: skipping hardreset on occupied port
[ 745.478156] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 745.481457] ata2.00: configured for UDMA/133
[ 745.481508] ata2: EH complete
[ 751.008319] ata2: drained 512 bytes to clear DRQ.
[ 751.008337] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 751.008349] ata2.00: failed command: IDENTIFY DEVICE
[ 751.008365] ata2.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 751.008369] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 751.008376] ata2.00: status: { DRDY }
[ 751.008390] ata2: hard resetting link
[ 751.008395] ata2: nv: skipping hardreset on occupied port
[ 751.462143] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 751.465456] ata2.00: configured for UDMA/133
[ 751.465508] ata2: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 07/02/2020 15:31:07] - End of Genesis manufacturing log.
[Thu 07/02/2020 15:31:07] - Exiting...
[Thu 07/02/2020 15:31:07] - Overall Result for Device: /dev/sg0 ****** FAIL ******
|
