Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 4)

Модерирует : Akam1, Dr_StandBy, vertex4

 Версия для печати • ПодписатьсяДобавить в закладки
На первую страницук этому сообщениюк последнему сообщению

Открыть новую тему     Написать ответ в эту тему

alltrash

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

[Mon 10/05/2020 06:40:29] - Successfully received the IDENTIFY data from the drive...
[Mon 10/05/2020 06:40:29] - Validating Manufacturing Firmware Package: /media/E2B/ssd/all/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
[Mon 10/05/2020 06:42:21] - Successfully opened the package: /media/E2B/ssd/all/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
[Mon 10/05/2020 06:42:22] - file  /media/E2B/ssd/all/Configuration_Files/33603.0.driveconfig Loaded successfully
[Mon 10/05/2020 06:42:22] - Warning:  Unable to query diagnostics information to perform power management settings check
[Mon 10/05/2020 06:42:22] - B01 Power Management configuration request detected
[Mon 10/05/2020 06:42:22] - Successfully extracted *.DriveConfig file: /media/E2B/ssd/all/Configuration_Files/33603.0.driveconfig
[Mon 10/05/2020 06:42:22] - Extracted Config_ID: 1 (33603) in DriveConfig file: /media/E2B/ssd/all/Configuration_Files/33603.0.driveconfig
[Mon 10/05/2020 06:42:22] - Extracted SerialOutputControl: 0
[Mon 10/05/2020 06:42:25] - Searching for flashware image for configuration 33603
[Mon 10/05/2020 06:42:25] - Manifest found for configuration 33603
[Mon 10/05/2020 06:42:25] - Flashware image extracted: 33603_fw_cl_mlc_Toshiba_128Gb_newRR_FT16B08UCT1-CA_2Q_1C_2D_PP_R03189_s512.vic
[Mon 10/05/2020 06:42:25] - Searching for manufacturing image for configuration 33603
[Mon 10/05/2020 06:42:26] - Manifest found for configuration 33603
[Mon 10/05/2020 06:42:26] - Manufacturing image extracted: 33603_mf_mlc_Toshiba_128Gb_newRR_FT16B08UCT1-CA_2Q_1C_2D_PP_R03189_s512.vic
[Mon 10/05/2020 06:42:26] - Proceeding in ROM mode, download feature 3...
[Mon 10/05/2020 06:42:26] - Successfully downloaded MFB to the drive...
[Mon 10/05/2020 06:42:26] - Waiting (5 sec) for the drive to settle...
[Mon 10/05/2020 06:42:31] - Successfully received the IDENTIFY data from the drive...
[Mon 10/05/2020 06:42:31] - Firmware revision reported to be: '60AABBM0'.  This indicates MFB download was successful.
[Mon 10/05/2020 06:42:31] - Successfully enabled SMART capabilities...
[Mon 10/05/2020 06:42:33] - Successfully issued a diagnostic unlock...
[Mon 10/05/2020 06:42:34] - Performing the flash test of block 0 (0x0000)...
[Mon 10/05/2020 06:42:35] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
 Flash Test Parameters:                              
-----------------------------------------------------------------------------
               Block Count: 0                      
                Page Count: 1                      
                 Bus Count: 2                      
        Chip Enabled Count: 1                      
                 Die Count: 2                      
                Lane Count: 4                      
               Plane Count: 2                      
-----------------------------------------------------------------------------
 Results Notes:                                      
-----------------------                              
   N1 - At least one page tested and passed with no bit errors.
   N2 - No test data available.  Test may have aborted, or failed during the testing.
   N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
   N4 - At least  one erased page tested had bit error rate greater than half the correction power.
   N5 - Walking zeros test failed.
   N6 - Walking ones test failed.
   N7 - Block contained factory bad block markings and testing was skipped.
   N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
   N9 - Block in plane 0 was marked as a factory bad block.
  N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
  N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
 
 
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus  | CE   | Die  | Lane | Value  | Result Notes                               | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 0    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 1    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 1    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 1    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 1    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 1    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 1    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 1    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 1    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
 
 
-----------------------------------------------------------------------------
  Total Number of test results: 16                      
            Number of failures: 1                      
         Number of Passed with warnings: 0                      
      No. Passed without warnings: 15                      
-----------------------------------------------------------------------------

Всего записей: 14 | Зарегистр. 23-07-2006 | Отправлено: 23:43 05-10-2020
Открыть новую тему     Написать ответ в эту тему

На первую страницук этому сообщениюк последнему сообщению

Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 4)


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru